June 2023 EnQuest North Sea Well: Slot 14 Thistle Platform Drill Type: N/A Gate Size: 5 1/2 inch and 1 1/16 inch Pressure: 250 psi Time to Mill: N/A Description: Mill Swab and Lower Master valve for P&A operations. Hot Tap unit used to Mill A anulus valve to enable well to be circulated. More […]
January 2023 Fri El Geothermal Italy Well:Exploration Drill Type:N/A Tbg Size:5 1/2 inch Kelly Valve Pressure:4200 psi Time to Mill:N/A Description:Freeze 5 inch Drill pipe below seized Kelly valve, remove and replace seized valve More To Explore
January 2023 Fri El Geothermal Italy Well:Exploration Drill Type:22 mm drill Tbg Size:N/A. drill through 5 1/2 inch seized closed Kelly Valve Pressure:4200 psi Time to Mill:35 minutes Description:Drill 5 1/2 inch Kelly Valve to inject freeze medium More To Explore
December 2022 Baker Hughes/Ithaca North Sea Well:A3 / A4 / A5 Drill Type:22 mm drill Tbg Size:3 1/2 inch / 5 1/2 inch / 7 5/8 inch Pressure:N/A Time to Mill:15 minutes each Description:Drill ESP Pods and 3 1/2 inch tbg and circulate clean More To Explore
November 2022 EnQuest North Sea Well: Heather H19 Drill Type: 22 mm drill Tbg Size: 3 1/2 inch Pressure: 80 psi Time to Mill: 15 minutes Description: Drill 3 1/2 inch tbg and circulate clean More To Explore
December 2021 Baker Hughes North Sea Well: Tailwind Orlando Drill Type: 22 mm drill Tbg Size: 7 5/8 inch Pressure: 20 psi Time to Mill: 15 minutes Description: Drill 7 inch casing More To Explore
December 2021 Ithaca North Sea Well:Captain C45 Drill Type:22 mm drill Tbg Size:7 5/8 inch Pressure:50 psi due to U tube Time to Mill:15 minutes per tap Description:Drill 7 5/8 inch ESP Pods and circulate clean More To Explore
May 2020 Baker Hughes North Sea Well:Jacky J01 Drill Type:22 mm drill Tbg Size:7 5/8 inch Pressure:150 psi due to U tube Time to Mill:5-10 minutes per tap (2 taps performed) Description:Drill 7 5/8 inch ESP Pods and circulate clean More To Explore
October 2019 Repsol Sinopec North Sea Well: Claymore C79 Drill Type: 22 mm drill Tbg Size: 3.5 inch, 4.5 inch and 7 5/8 inch Pressure: 150 psi due to U tube Time to Mill: 5-10 minutes per tap (4 taps performed) Description: Drill 4.5 inch tbg below AOF nipple. Drill 7 5/8 inch ESP Pods
May 2019 Southern North Sea Southern North Sea Well: D1 & D2 Mill Type: 5 inch step mill Gate Size: 5 inch Pressure: 1000 psi Time to Mill: 8 and 9.5 hours (2 valves) Description: Mill 2 off stuck lower master valves More To Explore